These look pretty good. The Blofeld and the Craig's Bond figures haven't been revealed yet, presumably they'll be two of the Craig's (same pose, one in white one in black tuxedo).
Taking a guess that the Blofeld will be Pleasance.....I'd like to think it's Gray's Blofeld in drag though.
Still it's better than filling up pages and pages of eggs :v
Egg bits. We may all be dead and gone before we see a whole egg. Well with any luck anyway. Stoopid egg. Stoopid Higgins.
.................................
PPK 7.65mmSaratoga Springs NY USAPosts: 1,256MI6 Agent
Just picked up the black tuxedo variant of the Sean Connery pop for my collection. Looking forward to getting the Daniel Craig pop when it comes out later this year.
The Pop DB5 was a fun piece.. Ive got it in my movie room with some other collectibles.
Just picked the DB5 for my collection this week, and I could not be happier. It is an amazing toy.
Now you have to go after the “Chase” figures exclusives!
PPK 7.65mmSaratoga Springs NY USAPosts: 1,256MI6 Agent
edited April 2019
Just ordered the Odd Job POP for the collection, should be here soon. I do hope that the Daniel Craig CR POP is coming out soon, I cannot seem to find any information on a release for it. If anyone here knows when its suppose to arrive, please send me a PM. Also I would love to see a POP made based on Timothy Dalton as Bond.
PPK 7.65mmSaratoga Springs NY USAPosts: 1,256MI6 Agent
edited May 2019
I got tired of waiting for the Daniel Craig pop to come out, so I decied to make one instead. I purchased the Roger Moore Pop as he is wearing a tuxedo and holding a Walther PPK. I just need to paint over his mole, recolor the eyes blue, change the hair and eyebrows to blonde and I will be good to go. Part of me is wondering if Funko decided to cancel the second wave, since I cannot seem to find any information about its release anywhere. Also this post from the message boards at www.mi6-hq.com has me convinced that no more Funko Pops are coming:https://www.mi6community.com/discussion/9811/007-funko-pop-figurines/p9
Apparently, in addition to the Jinx and CR Daniel Craig we were also going to get Honey Rider, M, Le Chiffre and Pierce Brosnan from Goldeneye in the second wave. I can only imagine how they would have looked (Both the Jinx and CR Daniel Craig had illustrations done when the line was first revealed.) Additionally, I would have loved a POP based on Timothy Dalton.
PPK 7.65mmSaratoga Springs NY USAPosts: 1,256MI6 Agent
Here is a list of the chase variants for anyone interested in adding these to your collection.
James Bond from Dr. No (black tuxedo, formerly a ToysRUs exclusive can be found online)
Odd Job from Goldfinger (hat off exclusive to Target)
James Bond from Octopussy (white Tuxedo exclusive to Barnes and Noble)
PPK 7.65mmSaratoga Springs NY USAPosts: 1,256MI6 Agent
edited July 2019
It appears I was mistaken, the second wave of Funko POPs will be coming out in September. The webstore at www.jamesbond.com is already taking pre-orders for them. The Daniel Craig in the white tuxedo from Spectre is an exclusive to the store. Here is a link: https://007store.com/
Thanks for the heads up - my kids love giving me these as presents!
Your welcome. It never ceases to amaze me at the number of licensed properties that become Funko POPs, when I heard that they had they were doing some based on the James Bond series I got really excited. As I mentioned before, I hope that a Timothy Dalton POP gets produced in the near future.
Thanks for the heads up - my kids love giving me these as presents!
Your welcome. It never ceases to amaze me at the number of licensed properties that become Funko POPs, when I heard that they had they were doing some based on the James Bond series I got really excited. As I mentioned before, I hope that a Timothy Dalton POP gets produced in the near future.
Buy every one in this wave and they might! I'm happy Brosnan got some recognition, I just wish it was on par with what Craig got. Moore and Connery had two each! Three for Connery if you count the DB5 ride!
Shame the Brosnan one looks so generic, could be anybody really, but I suppose it’s difficult to differentiate between them - wonder if a Dalton or Lazenby one would look the same? I like the look of the White Tux exclusive for Craig, and I’ll definitely get Baron Samedi and maybe Honey Ryder. Here’s hoping for a safari suit Moore and a Hilary Bray Lazenby in wave 3! :007)
‘Secret Agent?? On whose side?’
PPK 7.65mmSaratoga Springs NY USAPosts: 1,256MI6 Agent
edited August 2019
I just heard from the American retailer Gamestop, that the second wave of James Bond Funko POPs will be for pre-order this coming Saturday. I took the opportunity to pre-order the Quantum Of Solace Daniel Craig POP. I cannot wait until it arrives, especially since this is the first time Daniel Craig's likeness has appeared in toy form for the series.
Also I decided that instead of waiting, I am going to make a Timothy Dalton POP myself. I purchased a Roger Moore in black tuxedo POP, now I just need some model paints to recolor it to look like Dalton.
PPK 7.65mmSaratoga Springs NY USAPosts: 1,256MI6 Agent
The POPS have started arriving at retail, although they have been a little slow releasing them in the US. I have both the QOS Daniel Craig POP and the Goldeneye POP pre-ordered from Gamestop and hopefully soon I will have them in hand. Part is wondering if Funko has any plans to make POPS based on characters from No Time To Die. Just about every major commercial movie that comes out gets them, so I would think that it a strong possibly.
PPK 7.65mmSaratoga Springs NY USAPosts: 1,256MI6 Agent
Got my QOS Daniel Craig POP today, and I could not be happier. The clerk told me that the Goldeneye Pierce Brosnan POP is currently delayed for some reason. He said that a possibility for the delay is that Funko is redoing the mold so the POP looks more like Brosnan did at the time Goldeneye was released in cinemas. Hope that the wait is not too long, since it felt long enough for this wave of POPS to come to retail.
Got my QOS Daniel Craig POP today, and I could not be happier. The clerk told me that the Goldeneye Pierce Brosnan POP is currently delayed for some reason. He said that a possibility for the delay is that Funko is redoing the mold so the POP looks more like Brosnan did at the time Goldeneye was released in cinemas. Hope that the wait is not too long, since it felt long enough for this wave of POPS to come to retail.
Got my QOS Daniel Craig POP today, and I could not be happier. The clerk told me that the Goldeneye Pierce Brosnan POP is currently delayed for some reason. He said that a possibility for the delay is that Funko is redoing the mold so the POP looks more like Brosnan did at the time Goldeneye was released in cinemas. Hope that the wait is not too long, since it felt long enough for this wave of POPS to come to retail.
So I imagine he’ll get dark longer hair alongside the usual black circular eyes, triangular nose and no mouth?
Japanese proverb say, "Bird never make nest in bare tree".
Comments
www.justgiving.com/inMemoryOfLewisCollins
www.helpforheroes.org.uk
Taking a guess that the Blofeld will be Pleasance.....I'd like to think it's Gray's Blofeld in drag though.
The great thing about this forum is that all opiions are welcome, it's just that some opinions are more welcome than others
Still it's better than filling up pages and pages of eggs :v
www.justgiving.com/inMemoryOfLewisCollins
www.helpforheroes.org.uk
Egg bits. We may all be dead and gone before we see a whole egg. Well with any luck anyway. Stoopid egg. Stoopid Higgins.
Any news about the Daniel Craig pop? I can't seem to find for sale anywhere yet and last I knew it was suppose to be out this fall.
Smiles all round!
Just picked the DB5 for my collection this week, and I could not be happier. It is an amazing toy.
Now you have to go after the “Chase” figures exclusives!
However if you are thinking of getting them you can get the full set from Zavvi for the approximate price of one:
Also as I ordered them yesterday you can get an extra 1.50GBP off by using the voucher code WELCOME
https://www.zavvi.com/merch-figures/james-bond-complete-pop-vinyl-set/12097831.html?autocomplete=productsuggestion
Apparently, in addition to the Jinx and CR Daniel Craig we were also going to get Honey Rider, M, Le Chiffre and Pierce Brosnan from Goldeneye in the second wave. I can only imagine how they would have looked (Both the Jinx and CR Daniel Craig had illustrations done when the line was first revealed.) Additionally, I would have loved a POP based on Timothy Dalton.
James Bond from Dr. No (black tuxedo, formerly a ToysRUs exclusive can be found online)
Odd Job from Goldfinger (hat off exclusive to Target)
James Bond from Octopussy (white Tuxedo exclusive to Barnes and Noble)
Your welcome. It never ceases to amaze me at the number of licensed properties that become Funko POPs, when I heard that they had they were doing some based on the James Bond series I got really excited. As I mentioned before, I hope that a Timothy Dalton POP gets produced in the near future.
Buy every one in this wave and they might! I'm happy Brosnan got some recognition, I just wish it was on par with what Craig got. Moore and Connery had two each! Three for Connery if you count the DB5 ride!
Also I decided that instead of waiting, I am going to make a Timothy Dalton POP myself. I purchased a Roger Moore in black tuxedo POP, now I just need some model paints to recolor it to look like Dalton.
Where’d you find him at?
@ggl007 here you go
So I imagine he’ll get dark longer hair alongside the usual black circular eyes, triangular nose and no mouth?