Spectre ring - the best one

roi007

hey guys!
I'm looking for the most quality and accurate replica of the ring
I'm looking for a size 25
I found these:
1. https://007store.com/products/special-edition-spectre-octopus-ring
look like the real deal but it's inner diameter is only 20 mm to small
2.https://www.ebay.com/sch/i.html?_sop=15&_nkw=spectre+ring+bond

I believe I need a size 25 and I do not know what measurements at EBAY
pls help!

welshboy78

A member here who has the real deal recommended a ebay seller from Singapore and said it was very close. I cant remember the sellers name but he also offers a gold "Blofeld" version

UNCLE27

Have a read through this thread...
An excellent ring (set). Don't know if they're still selling as I haven't checked.

https://www.ajb007.co.uk/topic/47322/spectre-ring-on-a-budget-question/

welshboy78

Yup that ebay seller in that thread is the one!!!!

Still selling as I grabbed a gold recently

The S P E C T R E Engraving inside the ring is a nice touch also

ACACIA_AVENUE

I can only agree this is by far the closest match to the real deal.
Bought mine when they first came up for sale and have constantly worn it since then and is now looking nicely scratched and worn -{

Higgins

ACACIA_AVENUE wrote:

and have constantly worn it since then and is now looking nicely scratched and worn -{

You sound like your wife speaking about yourself :v

minigeff

Don't have the heart to weather mine up. Just can't bring myself to batter my ring

danjaq_0ff

I have worn mine since the day I got it



Love a battered ring

casino_royale

I suppose this is a screen used ring danjaq_0ff?

Looks amazing!

danjaq_0ff wrote:

I have worn mine since the day I got it



Love a battered ring

ACACIA_AVENUE

Higgins wrote:

ACACIA_AVENUE wrote:

and have constantly worn it since then and is now looking nicely scratched and worn -{

You sound like your wife speaking about yourself :v

) )

superado

welshboy78 wrote:

Yup that ebay seller in that thread is the one!!!!

Still selling as I grabbed a gold recently

The S P E C T R E Engraving inside the ring is a nice touch also

Is this the one that's US $13.99?

roi007

so i orderd all 3 from this guy
http://www.ebay.com/usr/moviememo?_trksid=p2047675.l2559
let's hope it's my size

RedDawn289

Please keep us posted when the shipment arrives I would like to hear and see how they turned out.

BondJasonBond006

The best one for sure must be the one I purchased at Bond in Motion in London for 145 £ four days ago :007)

Thunderpussy

There's a bloke outside selling Bond cigarette lighters
Four for a pound !

Higgins

BondJasonBond006 wrote:

The best one for sure must be the one I purchased at Bond in Motion in London for 145 £ four days ago :007)

Unfortunately not. These are not screen accurate as far as I know.

danjaq_0ff

BondJasonBond006 wrote:
The best one for sure must be the one I purchased at Bond in Motion in London for 145 £ four days ago

Higgybaby wrote:
Unfortunately not. These are not screen accurate as far as I know.





These were the 3d printed ones for the title sequence, when Bond is holding looking at the ring it changes in to the title sequence

RedDawn289

I was almost going to buy the bond in motion ring but knowing it's not screen accurate and how many replicas there are out there I didn't pull the trigger. My wife got me one of the replicas. It's not screen accurate by a long shot but it was from her and I know it still represents Spectre so I'm good with it.

danjaq_0ff

RedDawn289 wrote:

I was almost going to buy the bond in motion ring but knowing it's not screen accurate and how many replicas there are out there I didn't pull the trigger. My wife got me one of the replicas. It's not screen accurate by a long shot but it was from her and I know it still represents Spectre so I'm good with it.

The most SA ring out there is a brushed version of this one

http://www.ebay.com/itm/Spectre-James-Bond-007-Stainless-Steel-Ring-Prop-accurate-Men-/401046613149?var=&hash=item5d603dac9d:m:mNVm5mY4-2SUSNJarZaRXlg

But I agree with the one being from your wife being special -{

JTM

What's the sizing like on these eBay rings gentlemen? Looking to grab one but not really too sure of my proper ring size (never bought or even worn one before) so just measured my finger with a measuring tape and compared that with ring size charts online. Looks like i'm a hair under size 10 1/2 so for these rings that only come in full sizes would you say go size 10 or 11? Cheers -{

danjaq_0ff

JTM wrote:

What's the sizing like on these eBay rings gentlemen? Looking to grab one but not really too sure of my proper ring size (never bought or even worn one before) so just measured my finger with a measuring tape and compared that with ring size charts online. Looks like i'm a hair under size 10 1/2 so for these rings that only come in full sizes would you say go size 10 or 11? Cheers -{

If it were me I would size up, only because your fingers swell with heat. I know you are one of the lucky ones that have quite nice climate all of the time -{

The Bond Experience

I have a few of these and agree with Pete....especially since I bought it for the middle finger (no offense :007) )....my ring finger is 9.5 but my middle is 10.5...... I wound up getting an 11 and it fits snug so a 10 would have been disastrous...

JTM wrote:

What's the sizing like on these eBay rings gentlemen? Looking to grab one but not really too sure of my proper ring size (never bought or even worn one before) so just measured my finger with a measuring tape and compared that with ring size charts online. Looks like i'm a hair under size 10 1/2 so for these rings that only come in full sizes would you say go size 10 or 11? Cheers -{

danjaq_0ff

As long as you are not thinking of poking that middle finger up my rusty sheriff badge, no offence taken

Higgins

Ahem, I am sorry to disagree with the previous posters (again)...

What has been said, the above is correct if you don‘t have access to a decent goldsmith.

If you have a goldsmith with a machine to widen wedding rings, I recomment sizing DOWN and have it adjusted by the specialist.

Widening one-piece rings (not welded somewhere)is easier than making them smaller.

danjaq_0ff

Higgins wrote:

Ahem, I am sorry to disagree with the previous posters (again)...

What has been said, the above is correct if you don‘t have access to a decent goldsmith.

If you have a goldsmith with a machine to widen wedding rings, I recomment sizing DOWN and have it adjusted by the specialist.

Widening one-piece rings (not welded somewhere)is easier than making them smaller.

The rings are made out of titanium or stainless steel, Higgy, can a silversmith cope with that ?

JTM

Thanks for that team, went ahead and put in my order - better late than never -{ I measured out my ring finger for it so if it ends up being too large (I ordered the 11) I can hopefully just throw it on the middle finger instead.

Higgins

danjaq_0ff wrote:

The rings are made out of titanium or stainless steel, Higgy, can a silversmith cope with that ?

X-( HIGGINS X-(


Yes they can.

Stretching for half a size or one is no problem.
Alternatively the OP can size up and stick some band-aid inside like many girls do.

danjaq_0ff

Higgins wrote:

danjaq_0ff wrote:

The rings are made out of titanium or stainless steel, Higgy, can a silversmith cope with that ?

X-( HIGGINS X-(


Yes they can.

Stretching for half a size or one is no problem.
Alternatively the OP can size up and stick some band-aid inside like many girls do.

Id guess you would know, Widow Twanky

Gadget Meister

I am sorry, I will normally be open to most things, but I draw the line at having my ring stretched by Jizzy Higgy

Higgins

X-( the name is HIGGINS X-(

danjaq_0ff

Higgins wrote:

X-( the name is HIGGINS X-(

More like FRIGGINS ) ) ) AKA Jizzy Friggins. Ring stretcher.