Yes, if it is the same jackets as in The Predator, the guy in that wears it quite loose and it looks much better than the rather tight ones I’ve been seeing on here to my eye.
Could someone tell me the best place to pre-order the original Barton Pereira Joe in the UK please? Not worried about the special 007 labelled edition model but if that’s there is I’ll go with it.
Decided it can be my birthday treat -{
Thanks in advance.
My name has changed! I’m no longer dufus......now I’m DB6
Well, i received Rogue Territory Supply Jacket tonight. the sizing on this guy.. is weird. i'm 5'10" 175lbs. 42" chest fairly muscular. i take a medium in a lot of things. i'm right on the cusp of medium and large. my Barbour Beacon is a large.
either way, i went with a large and it's... tough. i'm notoriously indecisive.
the sleeve length is good, and with a t-shirt under it, it seems to be a fairly screen accurate fit. but i couldn't put a hoodie under this if i tried. it fits like a t-shirt almost, like the shoulder seam hits right on my shoulder bone as it should. i just didn't realize that bond was unable to move while wearing this jacket.
If it helps I was advised by RGT that for 46 inch chest best to order XXL.
Good post.
You and I are pretty much the same size. From what I gleaned from RT's measurements, I would've chosen an XL based strictly off of my best fitting Royale Filmwear numbers. The shoulders alone would be too tight for me on the Large. The predicted half inch of stretch wouldn't be enough to sway my decision.
While we always strive for that DC-accurate fit, remember what looks good on screen isn't always comfortable or practical. Exactly why there's often different sizes of the same garment on set.
I would definitely roll the dice on that XL. Let us know how it goes!
And always remember DC'S will be tailored given his shape.
But such a good point re wearing these pieces in real world.
Im a 41_42 chest and 34 waist, XL arrives later today so we will see
I'm not sure there's been any confirmation at all regarding the henley other then its more then likely Rag & Bone.
I misspoke and apologize, it’s a rag and bone Henley in slub, I guess I thought I had read somewhere that was the one. Screen accurate or not, it falls into the “close enough” camp for me and is a great shirt.
Well the one that is believed to be screen accurate is slub, so you might have the right one. However there is also another R&B model which is close to, but not, SA which I believe is slub as well. The SA model is the Standard Issue slub cotton henley which features the two tone worn looking metal buttons, whereas the non SA model is the Core long sleeve slub henley which features three white plastic (I think) buttons.
Tried to upload a pic of both but postimg isn’t working for me right now.
Has anyone received the MA Winch NTTD pants yet? I received an e-mail from MA today to say I can submit payment for the pants but would like to see pics before pulling the trigger. Perhaps MA can provide pics - I will ask them also.
Has anyone received the MA Winch NTTD pants yet? I received an e-mail from MA today to say I can submit payment for the pants but would like to see pics before pulling the trigger. Perhaps MA can provide pics - I will ask them also.
Unfortunately not. I am still waiting for a response from them
I'm not sure there's been any confirmation at all regarding the henley other then its more then likely Rag & Bone.
I misspoke and apologize, it’s a rag and bone Henley in slub, I guess I thought I had read somewhere that was the one. Screen accurate or not, it falls into the “close enough” camp for me and is a great shirt.
Well the one that is believed to be screen accurate is slub, so you might have the right one. However there is also another R&B model which is close to, but not, SA which I believe is slub as well. The SA model is the Standard Issue slub cotton henley which features the two tone worn looking metal buttons, whereas the non SA model is the Core long sleeve slub henley which features three white plastic (I think) buttons.
Tried to upload a pic of both but postimg isn’t working for me right now.
Well the one I got has the distressed metal buttons, so I lucked into that. I would never pay $150 for this shirt, but I do like it well enough that I am on the hunt for different colors. I'd buy this shirt all day long if it was ~$75.
Could anyone post a link here to the SA Rag&Bone henley and maybe some info on sizing. I initially didn‘t want to buy it but the trailer convinced me otherwise -{
Has anyone received the MA Winch NTTD pants yet? I received an e-mail from MA today to say I can submit payment for the pants but would like to see pics before pulling the trigger. Perhaps MA can provide pics - I will ask them also.
Unfortunately not. I am still waiting for a response from them
I just received an email from them this morning to arrange payment and s/h. I imagine there is someone here on the site that has a original pair.
Could anyone post a link here to the SA Rag&Bone henley and maybe some info on sizing. I initially didn‘t want to buy it but the trailer convinced me otherwise -{
Could anyone post a link here to the SA Rag&Bone henley and maybe some info on sizing. I initially didn‘t want to buy it but the trailer convinced me otherwise -{
You should be able to get it at least at a 15% discount using R&B's current code.
Lots of people have gone down a size, it seems. I didn't and feel like it fits appropriately (understanding that Craig is jacked in the photos we have).
Could anyone post a link here to the SA Rag&Bone henley and maybe some info on sizing. I initially didn‘t want to buy it but the trailer convinced me otherwise -{
According to R&G sizing guide I should take a medium, but have a small and it fits great, no way would a medium have worked on me. I'm on the slim side, but take mediums 99% of the time.
Could someone tell me the best place to pre-order the original Barton Pereira Joe in the UK please? Not worried about the special 007 labelled edition model but if that’s there is I’ll go with it.
It’s listed on Mr Porter as “off white” rather than the “white” on R&B, though what arrived from Mr Porter turned out to be “white” on the label and has the same style code as the one on the R&B site:
Confused much?!
Guys, is there a good way of softening up the RGT Supply jacket from out of the packaging? I’ve unfolded it but as it’s canvas is pretty stiff. Is there a tried and tested way of softening a sucker like this up? It’s a bit cold here in the UK to wear it out, unless I layer it beneath something else.
Excuse the collar, still needs some training:
Wind rain and snow, and just moving in it. Ranching and herding cattle, or wear it on a motorbike. ) Tough as old boots its looks better when worn. Dont wear it in heat as its like being in a plastic bag.
Dont wait for your ship to come in. Swim out and meet the bloody thing.
Could anyone post a link here to the SA Rag&Bone henley and maybe some info on sizing. I initially didn‘t want to buy it but the trailer convinced me otherwise -{
I'm not 100% sure which is the SA one so I won't post a link. But I do know from past purchases that R&B fit true to size. You should choose the size that you normally wear. -{
Pussy Galore: “My name is Pussy Galore.”
Bond: “I must be dreaming.”
Could anyone post a link here to the SA Rag&Bone henley and maybe some info on sizing. I initially didn‘t want to buy it but the trailer convinced me otherwise -{
I'm not 100% sure which is the SA one so I won't post a link. But I do know from past purchases that R&B fit true to size. You should choose the size that you normally wear. -{
The Mr. Porter version is the SA one. Both are near identical but the Mr. Porter version is in the correct jersey material.
Lifestyle guide to the products and locations featured in the James Bond films.
Could anyone post a link here to the SA Rag&Bone henley and maybe some info on sizing. I initially didn‘t want to buy it but the trailer convinced me otherwise -{
I'm not 100% sure which is the SA one so I won't post a link. But I do know from past purchases that R&B fit true to size. You should choose the size that you normally wear. -{
The Mr. Porter version is the SA one. Both are near identical but the Mr. Porter version is in the correct jersey material.
Another member on here mentioned that the current Rag and Bone Henley and the Mr. Porter version have the same reference information which is confusing. Now I'm not sure what to buy
Received my Supply jacket. I ordered a medium before reading these are really slim fit. I typically take a medium. It fits, but if I put on 5 pounds I may have a problem. Trying to decide if I should send it back for a large. I’m in Florida so I wear a lot of jackets over a t shirt, so this would work that way. But absolutely no layering underneath. And for reference I’m a 40” suit jacket all day long, 5’11” 175lbs.
This version looks good and merino wool will probably make it more bearable than the original 'wooly pully'. I'm really struggling with the idea of getting one having served in the British army for years - at least the absence of epaulettes might help!
My name has changed! I’m no longer dufus......now I’m DB6
Comments
Decided it can be my birthday treat -{
Thanks in advance.
Well the one I got has the distressed metal buttons, so I lucked into that. I would never pay $150 for this shirt, but I do like it well enough that I am on the hunt for different colors. I'd buy this shirt all day long if it was ~$75.
IG: @thebondarchives
Check it out, you won’t be disappointed
I just received an email from them this morning to arrange payment and s/h. I imagine there is someone here on the site that has a original pair.
https://www.rag-bone.com/mens/shirts/tshirts/classic-henley-M000T656G.html?utm_medium=email&utm_source=bouncex&utm_term=behavioralemail&utm_campaign=email_hypercartabandonment_pros_2_of_2&ibx_source=bnnc1a54rp1vducmoji0&ueh=69da0aa3d109067ab2ff872741c55d13805cbe203ea7328c0bdfdcd76b57d205#bx_cart=eyJjb3VudCI6MiwiZWlkIjoiMVVpUkJqbnBGTm41YU52eXpEemNsc2R1VzNWIiwiaXRlbXMiOm51bGwsInRva2VuIjoiYWI0bVR5S3lRQjFmZVI4Tkd0RlNsdThpcWgiLCJ2YWx1ZSI6IiJ9&h=bx_cart%3DeyJjb3VudCI6MiwiZWlkIjoiMVVpUkJqbnBGTm41YU52eXpEemNsc2R1VzNWIiwiaXRlbXMiOm51bGwsInRva2VuIjoiYWI0bVR5S3lRQjFmZVI4Tkd0RlNsdThpcWgiLCJ2YWx1ZSI6IiJ9&et_rid=112336572
Yes, this is the one:
https://www.rag-bone.com/mens/shirts/tshirts/classic-henley-M000T656G.html?categoryfrom=undefined#q=henley&start=1
You should be able to get it at least at a 15% discount using R&B's current code.
Lots of people have gone down a size, it seems. I didn't and feel like it fits appropriately (understanding that Craig is jacked in the photos we have).
According to R&G sizing guide I should take a medium, but have a small and it fits great, no way would a medium have worked on me. I'm on the slim side, but take mediums 99% of the time.
It appears to be the same color.
1. CR. 2. TSWLM. 3. LTK. 4. GF. 5. SF.
Confused much?!
IG: @thebondarchives
Check it out, you won’t be disappointed
I'm not 100% sure which is the SA one so I won't post a link. But I do know from past purchases that R&B fit true to size. You should choose the size that you normally wear. -{
Bond: “I must be dreaming.”
100% merino lambs wool.
Another member on here mentioned that the current Rag and Bone Henley and the Mr. Porter version have the same reference information which is confusing. Now I'm not sure what to buy
How is the fit on that one? I bought one off of Amazon and it is super tight under the arms, quality is good though.
KH
This version looks good and merino wool will probably make it more bearable than the original 'wooly pully'. I'm really struggling with the idea of getting one having served in the British army for years - at least the absence of epaulettes might help!