SIS ID Card

135

Comments

  • HalfMonk HalfHitmanHalfMonk HalfHitman USAPosts: 2,324MI6 Agent
    JTM wrote:
    Better photo, without Omega's blur.

    IMG_1610_zpsghiko5p2.jpeg

    We know the talented craftsman on these boards have access to the scan (I've got one with those exact serial and division numbers) - it's just that at the time Bond's ID photo as seen above wasn't out there, but now it is.

    GM, that's terrible news. And Kurtyboy has gone silent...
  • Asp9mmAsp9mm Over the Hills and Far Away.Posts: 7,483MI6 Agent
    edited July 2017
    Forget the paper tat. A really discerning Bond collector needs one of these....

    IMG_4719_zpsr2z5w0vd.jpg

    IMG_4720_zpsjlp0sryy.jpg

    IMG_4721_zpsssg2bvdu.jpg
    ..................Asp9mmSIG-1-2.jpg...............
  • JTMJTM Posts: 3,027MI6 Agent
    Oh wow, fantastic duo there Asp! Is the drive the real film prop, because it looks bang on? Love the id as well, even has the correct holder -{
  • Asp9mmAsp9mm Over the Hills and Far Away.Posts: 7,483MI6 Agent
    The drive isn't screen used, athough it's copied direct from the screen used ones and uses the exact same 1990's VCR greeblies in there. There are some subtle changes to those in the know so it can't be passed on as real in the future. The plastic case the board it sits in is from the original screen used production run. I only have this one and it is open to offers. It's about as accurate as you're gonna get apart from the originals.
    ..................Asp9mmSIG-1-2.jpg...............
  • always shakenalways shaken LondonPosts: 6,287MI6 Agent
    just as a side note ,when we did a combined "op" with MI5 years ago, they didn't have photos or names on their version of a warrant card ,like we had ,ours as most of you know was the force badge on the left side on a flap ,and your photo id on the right ,
    Now these me just had a white enamel rose with the words REGNUM DEFENDE underneath it , just thought id chip in , :)
    By the way, did I tell you, I was "Mad"?
  • SFPROPSSFPROPS USAPosts: 380MI6 Agent
    I could do one but I don't have the scan that is apparently out there that is of better quality than what's been offered in the past. Someone clue me in.
  • HalfMonk HalfHitmanHalfMonk HalfHitman USAPosts: 2,324MI6 Agent
    SFPROPS wrote:
    I could do one but I don't have the scan that is apparently out there that is of better quality than what's been offered in the past. Someone clue me in.

    I can't help with the scan of the card, but the issue is that when these talented folks were making theirs, the correct file photo of Bond was not available, and now it is.
  • TennysonTennyson A View to a KillPosts: 606MI6 Agent
    just as a side note ,when we did a combined "op" with MI5 years ago, they didn't have photos or names on their version of a warrant card ,like we had ,ours as most of you know was the force badge on the left side on a flap ,and your photo id on the right ,
    Now these me just had a white enamel rose with the words REGNUM DEFENDE underneath it , just thought id chip in , :)

    Much like Special Branch, they did/do have a photograph, but says ‘DC 12345 is an officer in this force’
  • HalfMonk HalfHitmanHalfMonk HalfHitman USAPosts: 2,324MI6 Agent
    A once a month bump to see if the gents who made these excellent props can be persuaded to do another run with Bond's screen accurate ID photo...

    Just floating this one again. Anyone heard from Kurtyboy lately?
  • danjaq_0ffdanjaq_0ff The SwampsPosts: 7,283MI6 Agent
    A once a month bump to see if the gents who made these excellent props can be persuaded to do another run with Bond's screen accurate ID photo...

    Just floating this one again. Anyone heard from Kurtyboy lately?

    Not for a few years, unfortunately.
  • HalfMonk HalfHitmanHalfMonk HalfHitman USAPosts: 2,324MI6 Agent
    Still hoping someone will resurrect the SKYFALL MI6/SIS badges so we can get an ID card with the proper file photo of Bond. Anyone?
  • SFPROPSSFPROPS USAPosts: 380MI6 Agent
    I've got the files for the card and card holders, just need the photo which I don't have. I've done them laminated before but can do them printed on plastic as well.
  • cederic0011cederic0011 UKPosts: 181MI6 Agent
    SFPROPS wrote:
    I've got the files for the card and card holders, just need the photo which I don't have. I've done them laminated before but can do them printed on plastic as well.

    Is this the one:
    87132634-_BA4_E-413_D-_ACEA-8_F3_CBC987_BD2.jpg
  • danjaq_0ffdanjaq_0ff The SwampsPosts: 7,283MI6 Agent
    edited March 2018
    It is the SF one, yes, but they are printed on plastic -{
  • emtiememtiem SurreyPosts: 5,686MI6 Agent
    Where did you find that photo, out of interest? Looks bang on.
  • cederic0011cederic0011 UKPosts: 181MI6 Agent
    emtiem wrote:
    Where did you find that photo, out of interest? Looks bang on.

    I came across it some time back on internet and saved it - have been searching for the tie ever since !!
  • HalfMonk HalfHitmanHalfMonk HalfHitman USAPosts: 2,324MI6 Agent
    edited March 2018
    SFPROPS wrote:
    I've got the files for the card and card holders, just need the photo which I don't have. I've done them laminated before but can do them printed on plastic as well.

    Please use this higher resolution pic - two-sided printed on plastic cards as GM and Kurtyboy did:

    Sp.jpg
  • SFPROPSSFPROPS USAPosts: 380MI6 Agent
    I'll put it together shortly and offer some up . My card printer won't be in for a month though. It's part of a work project I put together which will give me access a short walk from my office to 2 large-scale 3D printers, a laser cutter, CNC router, a vinyl/paper cutter-plotter, industrial sewing machine and a few other knick knacks.
  • SFPROPSSFPROPS USAPosts: 380MI6 Agent
    Sorry for the warp and "proof." Force of habit. But here's a card I offered previously as part of my "Dead and Back" set that had the medical report, file folder, routing slip, ID and a few other things. It has the new photo on it now. Again -as soon as I get the printer up and running I'll start making these. Cedric, for being the first to help with the new image send me your address and I'll forward one gratis. Also remind me of this when I end up having some to offer.

    Also, a few of these new tools will let me go back to another project I'd been working on that I think will solve a few tricky spots I was having a hard time figuring out in order to produce. This would be the Skyfall envelope set Q gives Bond with the envelope, airline tickets, hotel reservations and passport. If all goes well, the passport will be made with red leatherette paper with gold embossing. Getting the passport pieces cut and lined up properly is where I hit a snag. A Cameo Silhouette cutter will solve this problem for me.


    ID_LAYOUT.png
  • HalfMonk HalfHitmanHalfMonk HalfHitman USAPosts: 2,324MI6 Agent
    Thanks for taking this on! I've been asking in this thread for four years :))

    Looks great; excited to purchase when you're ready (and no need to source a holder if that's an issue; I've got one already).
  • 007Downunder007Downunder Hobart, Australia Posts: 373MI6 Agent
    Looks really cool definitely interested
    Anthony
  • Enjoying DeathEnjoying Death Toronto, ON CANADAPosts: 1,231MI6 Agent
    Any idea on cost?
    Pussy Galore: “My name is Pussy Galore.”
    Bond: “I must be dreaming.”
  • SFPROPSSFPROPS USAPosts: 380MI6 Agent
    Not sure yet, but probably less than what others have charged for something similar I'm guessing so start there. I've got to do the math on the supplies once I've got everything together. Shipping will be whatever actual costs to send out are.
  • UNCLE27UNCLE27 EnglandPosts: 1,114MI6 Agent
    I'm interested in this too...
  • thespyboys11thespyboys11 Lindenwold,NJPosts: 1,844MI6 Agent
    Keep us up to date on availability. --Ed
  • CB0012CB0012 Posts: 110MI6 Agent
    Outstanding work! I'm looking to start collecting more of these so this is perfect timing. Count me in as well.
  • Quentin QuigleyQuentin Quigley Terminal One, Hamburg AirportPosts: 1,150MI6 Agent
    Started working on this project a few years ago, casually, and finally have something to show now. I bought some tags last year, but they never arrived... After a second attempt, purchasing from another seller, they arrived today. Credit to everyone who has posted images of any production made SIS IDs on this forum, and the correct Craig portrait.

    47924104978_f9776c8c92.jpg
    47924103497_c83fbe674f_z.jpg

    The back of mine have the usual detail - the magnetic stripe, crest, disclaimers etc. The back of the SF card is seen in the film - enough to see where the magnetic stripe is positioned.

    47924104153_ab1f5bab68.jpg

    47924124661_eb1aa263df_n.jpg
    47924100382_3c0befbeec_n.jpg
    ^A different Q ID seen at Lego Creator and Spyscape exhibits. Bottom pic is mine, and the skin colour's very close to the orig, but seems rather green here. I suppose this is what Q looks like when forced to fly on a plane.

    How come the different Q photo? Is it a genuine variant or fan replica?

    47924099317_8d8fcdc8fa_c.jpg
    Q's SP ID. His photo is not as hi-res as I'd like, but acceptable.

    I've also done some work on the Moneypenny ID, as well as another character. MP's hair doesn't fit in the photo frame :))
    Always have an escape plan. Mine is watching James Bond films.
  • Alex1995Alex1995 France/GermanyPosts: 339MI6 Agent
    Nicely done -{

    Good to see some props back ;)

    - François
    1.GE 2.FRWL 3.CR 4.FYEO 5.LALD 6.TSWLM
    7.GF 8.TLD 9.TND 10.SF

    "Where’s Fekkesh?” “Pyramids.” *thwap* “AHHHHHHH!”
  • danjaq_0ffdanjaq_0ff The SwampsPosts: 7,283MI6 Agent
    Started working on this project a few years ago, casually, and finally have something to show now. I bought some tags last year, but they never arrived... After a second attempt, purchasing from another seller, they arrived today. Credit to everyone who has posted images of any production made SIS IDs on this forum, and the correct Craig portrait.

    47924104978_f9776c8c92.jpg
    47924103497_c83fbe674f_z.jpg

    The back of mine have the usual detail - the magnetic stripe, crest, disclaimers etc. The back of the SF card is seen in the film - enough to see where the magnetic stripe is positioned.

    47924104153_ab1f5bab68.jpg

    47924124661_eb1aa263df_n.jpg
    47924100382_3c0befbeec_n.jpg
    ^A different Q ID seen at Lego Creator and Spyscape exhibits. Bottom pic is mine, and the skin colour's very close to the orig, but seems rather green here. I suppose this is what Q looks like when forced to fly on a plane.

    How come the different Q photo? Is it a genuine variant or fan replica?

    47924099317_8d8fcdc8fa_c.jpg
    Q's SP ID. His photo is not as hi-res as I'd like, but acceptable.

    I've also done some work on the Moneypenny ID, as well as another character. MP's hair doesn't fit in the photo frame :))

    Very nice :) -{
  • ACACIA_AVENUEACACIA_AVENUE UKPosts: 1,774MI6 Agent
    Nicely Done QQ -{
    I agree, always good to see some props AJB, its been very quite prop wise lately :(
    One of us smells like a tart's handkerchief.
Sign In or Register to comment.